U3542
High Voltage System Interlock Circuit O Performance
HVIL loop O timing/pattern does not match expected behavior. A communication loss with this module breaks any function relying on its data — diagnostic tools may show 'no response' and dependent modules can fall into limp mode.
- Check engine light: Yes
- Emissions related: No
- Repair difficulty: hard
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Common causes
Ordered by how often each turns out to be the cause.
- Intermittent contact in HV connectorCommon
- Gateway module routing CAN messages incorrectlyLess likely
- CAN terminating resistor (120 Ω) drifted out of specLess likely
Parts involved
- Hvil Loop O
U3542 is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.