U0426
Invalid Data Received from Vehicle Immobiliser Control Module
The Vehicle Immobiliser Control Module is present on the data bus but the values it reports are implausible — out of range, frozen, or failing the checksum or rolling-count check. The receiving modules reject the data. Start authorisation may fail. Causes include a faulty sensor feeding the module, internal computation errors, a software or calibration mismatch after a repair, or bus interference corrupting the frames.
- Check engine light: Yes
- Emissions related: No
- Repair difficulty: hard
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Common causes
Ordered by how often each turns out to be the cause.
- Immobiliser internal faultPossible
- CAN corruption causing checksum errorsPossible
- Gateway module routing CAN messages incorrectlyLess likely
Parts involved
- Immobiliser Module
- CAN Bus Wiring
U0426 is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.