U0421
Invalid Data Received from Throttle/Pedal Position Sensor
The ECU receives implausible accelerator pedal or throttle data over the bus. The engine drops to limp-mode with reduced power.
- Check engine light: Yes
- Emissions related: No
- Repair difficulty: medium
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Common causes
Ordered by how often each turns out to be the cause.
- Pedal sensor partially failedPossible
- Gateway module routing CAN messages incorrectlyLess likely
- CAN terminating resistor (120 Ω) drifted out of specLess likely
Parts involved
- Accelerator Pedal Sensor
- Throttle Actuator
U0421 is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.