U0223
Lost Communication With Door Window Motor B
The ECU has lost communication with door window motor B, a smart window motor with its own bus interface. One-touch and anti-pinch operation of that window stops, and it may work only manually, if at all. Causes: loss of power or ground at the motor, a broken bus or supply wire in the door harness, a damaged door connector, or a failed motor module.
- Check engine light: Yes
- Emissions related: No
- Repair difficulty: medium
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Common causes
Ordered by how often each turns out to be the cause.
- Module unpoweredCommon
- Gateway module routing CAN messages incorrectlyLess likely
- CAN terminating resistor (120 Ω) drifted out of specLess likely
Parts involved
- Window Motor B
- CAN Bus
U0223 is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.