U0001
High Speed CAN Communication Bus
A general fault on the high-speed CAN bus has been detected. This bus typically connects powertrain modules (ECM, TCM, ABS) at 500 kbit/s and a fault disables communication between them, often triggering multiple secondary DTCs in other modules.
- Check engine light: Yes
- Emissions related: No
- Repair difficulty: hard
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Common causes
Ordered by how often each turns out to be the cause.
- CAN-High and CAN-Low shorted togetherCommon
- Open circuit in CAN bus wiringCommon
- Terminating resistor failed (not 60 ohms across bus)Possible
Parts involved
- CAN Bus Wiring
- CAN Terminating Resistor
- Control Module
U0001 is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.