P34C5
A Camshaft Position Actuator Control Circuit Driver Current/Temperature Too High Bank 2
Driver stage controlling the intake cam position actuator on bank 2 reports overcurrent or overtemperature. The camshaft position sensor identifies which cylinder is on the compression stroke — without it the ECM cannot run sequential injection or coil-on-plug ignition correctly.
- Check engine light: Yes
- Emissions related: Yes
- Repair difficulty: hard
Symptoms
- Check engine light on
- Power loss especially in mid-rpm range
- Possible rough idle or stalling
- Increased fuel consumption
Common causes
Ordered by how often each turns out to be the cause.
- Short circuit in actuator wiring or coilCommon
Parts involved
- Cam Actuator A Driver B2
- Cam Actuator A B2
P34C5 is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.