P2BE4
Hybrid/EV Battery Pack Current Sensor C Circuit
The hybrid control module detects a circuit fault on the high-voltage battery pack current sensor C. Pack-level current measurement is impaired.
- Check engine light: Yes
- Emissions related: No
- Repair difficulty: hard
Symptoms
- EV/hybrid system warning light on
- Reduced power output or limp mode
- Charging may fail or be slowed
- Reduced electric range
Common causes
Ordered by how often each turns out to be the cause.
- Current sensor failedCommon
- Wiring or connector faultPossible
- Pack cell imbalance approaching service thresholdLess likely
Parts involved
- Hybrid Battery Current Sensor C
- Wiring Harness
- Bms
P2BE4 is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.