P278E
Kick Down Switch Circuit Intermittent/Erratic
The kick-down switch signal jumps or drops out intermittently. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
- Check engine light: Yes
- Emissions related: No
- Repair difficulty: easy
Common causes
Ordered by how often each turns out to be the cause.
- Switch connector not fully seatedCommon
- Worn switch contactsPossible
- Connector with intermittent contact under vibrationLess likely
Parts involved
- Kickdown Switch
- Wiring Harness
P278E is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.