P274D
Transmission Fluid Temperature Sensor C Circuit High
The third transmission fluid temperature sensor signal is above the upper diagnostic threshold. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
- Check engine light: Yes
- Emissions related: No
- Repair difficulty: medium
Symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Common causes
Ordered by how often each turns out to be the cause.
- Open sensor elementCommon
- Signal wire shorted to the 5 V referencePossible
- Connector pins corroded - high contact resistanceLess likely
Parts involved
- Trans Fluid Temp Sensor C
- Wiring Harness
P274D is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.