P2748
Intermediate Shaft Speed Sensor B Circuit Intermittent
The intermediate shaft speed sensor B signal jumps or drops out intermittently. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
- Check engine light: Yes
- Emissions related: No
- Repair difficulty: medium
Common causes
Ordered by how often each turns out to be the cause.
- Sensor connector not fully seatedCommon
- Harness chafed against transmission housingPossible
- Connector with intermittent contact under vibrationLess likely
Parts involved
- Intermediate Shaft Speed Sensor B
- Wiring Harness
P2748 is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.