P2633
Fuel Pump B Control Circuit Low
Voltage on the second fuel pump control line is below the expected window. Usually a short to ground or a shorted motor winding.
- Check engine light: Yes
- Emissions related: No
- Repair difficulty: medium
Symptoms
- Check engine light on
- Hard start, no start, or stalling under load
- Power loss especially at high load or rpm
- Possible long cranking time
Common causes
Ordered by how often each turns out to be the cause.
- Control wire shorted to groundCommon
- Internal short in pump motorPossible
- Connector pins corroded - high contact resistanceLess likely
Parts involved
- Fuel Pump B
- Wiring Harness
P2633 is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.