P0C68
Generator Position Sensor Circuit A Circuit Intermittent/Erratic
The generator position sensor channel A reports a circuit intermittent/erratic fault. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
- Check engine light: Yes
- Emissions related: No
- Repair difficulty: hard
Common causes
Ordered by how often each turns out to be the cause.
- Connector not seatedCommon
- Noisy ground referencePossible
- Connector with intermittent contact under vibrationLess likely
Parts involved
- Generator Position Sensor A
- Wiring Harness
- Hybrid Control Module
P0C68 is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.