P0C57
Drive Motor B Position Sensor Circuit A Circuit Low
The position sensor channel A of drive motor B reports a circuit low fault. Phase commutation feedback impaired on this channel.
- Check engine light: Yes
- Emissions related: No
- Repair difficulty: hard
Symptoms
- EV/hybrid system warning light on
- Reduced motor power or torque
- Possible limp mode or vehicle shutdown
Common causes
Ordered by how often each turns out to be the cause.
- Signal wire shorted to groundCommon
- Internal sensor shortPossible
- Connector pins corroded - high contact resistanceLess likely
Parts involved
- Drive Motor B Position Sensor A
- Wiring Harness
- Hybrid Control Module
P0C57 is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.