P088C
Reverse Inhibit Control Circuit Low
Voltage on the reverse inhibit control circuit is below the expected window. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
- Check engine light: Yes
- Emissions related: No
- Repair difficulty: medium
Symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Common causes
Ordered by how often each turns out to be the cause.
- Wire shorted to groundCommon
- Actuator internal shortPossible
- Connector pins corroded - high contact resistanceLess likely
Parts involved
- Reverse Inhibit Control
- Wiring Harness
- TCM
P088C is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.