P074E
Unable to Engage Gear 6
The transmission cannot engage gear 6 when it is commanded. The element that should apply for gear 6 — shift solenoid, clutch pack, or band — does not build or hold pressure, so the gear never locks in. Symptoms are slipping, no power transfer in that gear, or a forced limp mode. Causes: a failed shift solenoid, a worn clutch pack, or a valve-body or hydraulic-supply fault on the gear-6 circuit.
- Check engine light: Yes
- Emissions related: No
- Repair difficulty: hard
Symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Common causes
Ordered by how often each turns out to be the cause.
- Gear 6 circuit failedCommon
Parts involved
- Transmission
P074E is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.