Skip to content
Book on WhatsApp

P06AE

Control Module Internal Temperature Sensor B Circuit High

Same as P0669 on internal sensor B. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.

  • Check engine light: Yes
  • Emissions related: No
  • Repair difficulty: hard

Symptoms

  • Check engine light on
  • Possible limp mode or no-start
  • Multiple follow-up faults across modules
  • Reset/relearn may be needed after repair

Common causes

Ordered by how often each turns out to be the cause.

  • Sensor internal openCommon
  • Connector pins corroded - high contact resistanceLess likely
  • Supply wire pinched against B+ sourceLess likely

Parts involved

  • ECU Internal Temperature Sensor B

P06AE is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.