Skip to content
Book on WhatsApp

P06A3

Sensor Reference Voltage D Circuit Open

The 5-volt sensor reference rail D is open — the module supplies no voltage on this circuit. Every sensor powered from reference D loses its supply and reads invalid, so the ECU substitutes default values and may limit engine operation. Causes: a broken reference wire, a disconnected connector, or an internal open in the module's voltage regulator for rail D.

  • Check engine light: Yes
  • Emissions related: Yes
  • Repair difficulty: medium

Symptoms

  • Check engine light on
  • Possible limp mode or no-start
  • Multiple follow-up faults across modules
  • Reset/relearn may be needed after repair

Common causes

Ordered by how often each turns out to be the cause.

  • Open in shared reference railCommon
  • Pin pushed back out of connector bodyLess likely
  • Cracked solder joint inside the module or sensorLess likely

Parts involved

  • Sensor Reference Voltage D

P06A3 is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.