Skip to content
Book on WhatsApp

P0664

Intake Manifold Tuning Valve Control Circuit Low Bank 2

Same as P0661 on bank 2. The intake manifold runner control (IMRC) flaps tune intake geometry for filling efficiency across the rpm range; stuck flaps cost part-load torque and can set lean codes.

  • Check engine light: Yes
  • Emissions related: Yes
  • Repair difficulty: medium

Symptoms

  • Check engine light on
  • Possible limp mode or no-start
  • Multiple follow-up faults across modules
  • Reset/relearn may be needed after repair

Common causes

Ordered by how often each turns out to be the cause.

  • Control line shorted to groundCommon
  • Connector pins corroded - high contact resistanceLess likely
  • Harness chafing through insulationLess likely

Parts involved

  • Intake Manifold Tuning Valve B2

P0664 is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.