P0552
Power Steering Pressure Sensor Circuit Low Input
PS pressure sensor signal voltage below threshold — open, short to ground, or sensor failure. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
- Check engine light: Yes
- Emissions related: No
- Repair difficulty: medium
Common causes
Ordered by how often each turns out to be the cause.
- Sensor circuit shorted to ground or openCommon
- Connector pins corroded - high contact resistanceLess likely
- Harness chafing through insulationLess likely
Parts involved
- Power Steering Pressure Sensor
- Ps Sensor Wiring
P0552 is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.