P04F7
Catalyst Heater Circuit High Bank 2
Same as P04F6 on bank 2. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
- Check engine light: Yes
- Emissions related: Yes
- Repair difficulty: hard
Symptoms
- Check engine light on
- Failed emissions inspection
- Possibly slightly increased fuel consumption
- Sulfur (rotten egg) smell from exhaust under load
Common causes
Ordered by how often each turns out to be the cause.
- Control line shorted to supplyCommon
- Connector pins corroded - high contact resistanceLess likely
- Supply wire pinched against B+ sourceLess likely
Parts involved
- Electric Catalyst Heater B2
P04F7 is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.