P025B
Fuel Pump Module A Control Circuit Range/Performance
Fuel pump module A does not respond as expected. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
- Check engine light: Yes
- Emissions related: Yes
- Repair difficulty: hard
Symptoms
- Check engine light on
- Hard start, no start, or stalling under load
- Power loss especially at high load or rpm
- Possible long cranking time
Common causes
Ordered by how often each turns out to be the cause.
- Module internal faultCommon
- Sensor element aged beyond calibration windowLess likely
- Sensor mounting loose - signal dampingLess likely
Parts involved
- Fuel Pump Module A
P025B is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.