P00F5
Humidity Sensor Circuit High
Humidity sensor signal voltage above expected range. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
- Check engine light: Yes
- Emissions related: Yes
- Repair difficulty: easy
Common causes
Ordered by how often each turns out to be the cause.
- Signal wire shorted to batteryCommon
- Connector pins corroded - high contact resistanceLess likely
- Supply wire pinched against B+ sourceLess likely
Parts involved
- Humidity Sensor
- Sensor Wiring
P00F5 is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.