C0563
Calibration Mismatch
The chassis control module has detected that stored calibration values do not match the current vehicle configuration — for example after a wheel/tire size change or replacement of an inertial sensor cluster. Stability functions are degraded.
- Check engine light: Not always
- Emissions related: No
- Repair difficulty: medium
Symptoms
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Common causes
Ordered by how often each turns out to be the cause.
- Wheel size or sensor cluster mismatchCommon
- Stored calibration data corruptedLess likely
Parts involved
- Chassis Control Module
- Sensor Cluster
- Steering Angle Sensor
C0563 is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.