C0560
Calibration Required
The chassis control module reports that a sensor or system calibration must be performed — for example after replacement of the steering angle, yaw rate or radar sensor. Affected functions remain disabled until calibration is completed.
- Check engine light: Not always
- Emissions related: No
- Repair difficulty: medium
Symptoms
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Common causes
Ordered by how often each turns out to be the cause.
- Required calibration not performed after serviceCommon
- Calibration drive cycle incompletePossible
Parts involved
- Steering Angle Sensor
- Yaw Rate Sensor
- Acc Radar Sensor
- Chassis Control Module
C0560 is a generic OBD-II code defined by SAE J2012. Exact wording and diagnostic procedure vary by manufacturer and model. Code definitions are drawn from the public-domain OBDex dataset; the workshop notes are our own.